Home

Resin Specification Summary

Gadres 2010

Gadres 4000

Gadres 2050

Gadres 3050

Gadres 6000

Aquapoxie

Fastroc

Click on Picture to See Video

Click on Picture to See Video

Click on Picture to See Video

Prices

Prices ???...Click Here For More Info

Description

General All purpose Resin. Low viscosity means speedy wet out. Gives good working time in bulk and cure rapidly in thin film

"Summer Resin". Give maximum working time of up to 5 hours yets cures quickly below ground with or without assistance of heat. Ideal for long shots or work in Summer.

"Winter Resin". Gives typically 20 minutes working time and cures within minutes after that. Cure rapidly even in Winter. Ideal for companies doing short shots

Fast "Shrink Free Resin." Ideal for Point repairs as there is Zero annular gap after curing. Gives typically 20 minutes working time and cures within minutes after that

Slow, "Shrink Free Resin" meaning Zero annular gap when cured. Great when there is infiltration problems. Gives maximum working time of up to 5 hours yet cures rapidly below ground.

Smell Free, General Purpose Epoxy resin. Has relatively long working Life yet cures rapidly below ground without the need for heat.

Smell Free General Purpose Silicate resin. Has relatively long working Life yet cures rapidly below ground without the need for heat.

Specification Data Sheets

Click Here to Download PDF

Mix Tables

Click Here to Download PDF

Curing Tables

Click Here to Download PDF

Chemistry

Unaccelerated Polyester resin

Preaccelerated Polyester resin

Preaccelerated Polyester Resin

Epoxy resin

Silicate Polyurethane

3.4385

Ambient cure

Yes

Range of Pot Life at 70 deg F

50 - 80 mins

2-3 hrs

15- 30 mins

2 - 3 hrs

15 - 30 mins

20 -40 mins

Range of Time to Hardness at 42 deg F

2 -3 hours

4 - 6 hrs

40 - 80 mins

4 - 7 hrs

4-8 hrs

2 - 3 hrs

Range of Time to Hardness at 70 deg F

3-6 hrs

25-35 mins

5 - 8 hrs

2-4 hrs

< 1hrs

Range of Time to Hardness at 125 deg F

< 1 hrs

< 10 mins

4 - 12 hrs

< 1hrs

Supply style

Resin separate from Accelerator and Hardener. Resin only sold

Resin and accelerator premixed , sold with hardener

Resin and accelerator premixed , hardener sold with kit

Resin and accelerator premixed , sold with hardener

Resin sold with hardener.

Shrinkage over 1%

Yes

Smell

Average styrene smell

Average Styrene Smell

Low styrene smell

Low Styrene smell

No solvent smell

Supply Size

20 x 20kg

40 x 3kg or 20 x 20 kg

20 x 20kg

10 x 30kg kits

20 x 7 kg kits

Chemical resistance

Medium …Click Here to See Chemical Resistance Table

Medium/High….Click Here to See Chemcial Resistance Table

Material Safety Data for UK

Click Here to Download

Material Safety Data for US

Click Here to Download